Timer Operation; Setting The Clock - Ariston A-MW07-HBX Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
UK
Operation in cooling mode
Funzionamento in riscaldamento
1 hour
*
2 hours
*
1 hour
2 hours
(*) Temperature set
*Temperature set

TIMER OPERATION

This function allows you to turn the air conditioning unit on (or off) automatically
at the desired time.
TIMED STARTING "T-ON"
Before programming the timed starting, check that the air conditioning unit is set
to the desired operating mode.
Press the T-ON button,
will come up on the display and the word ON will
start flashing, use the TEMP UP/DN button to select the time at which you wish
the appliance to come on. Confirm the setting by pressing the T-ON. button
again. To disable the T-ON function, use the CANCEL button.
Warning: if the programmed setting is not confirmed or cancelled, it will be deleted
automatically after a few seconds.
TIMED STOPPING "T-OFF"
To programme the stopping time, press the T-OFF button,
will come up on
the display and the word OFF will start flashing, use the TEMP UP/DN button to
select the time you wish the appliance to stop. Confirm the setting by pressing
the T-OFF button again. To disable the T-OFF function, use the CANCEL button.
Warning: if the programmed setting is not confirmed or cancelled, it will be dele-
ted automatically after a few seconds.
NOTES:
In the event of a power failure, the clock inside the appliance stops. This means
the times set will not be kept to. As soon as the power supply comes back on,
just send the appliance a signal by pressing any one of the remote control but-
tons to restore the times set previously.

SETTING THE CLOCK

The remote control features the clock function.
Press the CLOCK button and AM will start flashing on the display, press the
TEMP UP/DN button to set the correct time. Press the CLOCK button again to
confirm your setting, AM will stop flashing and the correct time has been set suc-
cessfully.
NOTE: the clock uses AM - PM times.
AM stands for the time passing from 00:00 until 11:59 in the morning.
PM stands for the time passing from 12:00 until 23:59 at night.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents