Asus SABERTOOTH Z170 Manual page 83

Channel A DIMM Control [Enable Both DIMMS]
Allows you to enable or disable the Channel A DIMM slots.
Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Channel B DIMM Control [Enable Both DIMMS]
Allows you to enable or disable the Channel B DIMM slots.
Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
MCH Full Check [Auto]
Enable this item to enhance the stability of your system. Disable this item to enhance
the DRAM overclocking capability.
Configuration options: [Auto] [Enabled] [Disabled]
DLLBwEn [Auto]
Select values from 2 to 4 for best memory overclocking.
Configuration options: [Auto] [1] - [7]
DRAM SPD Write [Disabled]
Enable this item to enable SMBus programming.
Configuration options: [Disabled] [Enabled]
External DIGI+ Power Control
CPU Load-line Calibration [Auto]
Load-line is defined by Intel
working voltage decreases proportionally to CPU loading. Higher load-line calibration
could get higher voltage and good overclocking performance, but increases the CPU
and VRM thermal conditions. Select from levels 1 to 8 to adjust the CPU power voltage
from 0% to 100%.
Configuration options [Auto] [Level 1] - [Level 8]
The actual performance boost may vary depending on your CPU specification.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Current Capability [Auto]
This item provides a total power range for CPU overclocking. A higher value setting
provides higher power consumption delivery and extends the overclocking frequency
range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Configure higher values when overclocking or under a high CPU loading for extra power
support.
SABERTOOTH Z170 S
specification and affects CPU power voltage. The CPU
®
3-19