Chapter 2:
Basic Installation
Basic Installation
2.1
Building your PC system
2.1.1
IO Cover installation
The SABERTOOTH Z170 S motherboard package can be installed with a 40 mm assistant
fan for additional cooling solution and better airflow.
To install the 40 mm assistant fan:
1.
Locate and remove the screw on the back I/O (A) then remove the back I/O fan cover
lid (B). Keep the screws for later use.
2.
Position and install the 40 mm assistant fan* in an orientation such that the fan draws
air into the chassis for optimal heat dissipation and air ventilation.
3.
Match the two (2) screw holes on the 40 mm assistant fan with the two (2) screw holes
on the cover lid and secure it with two (2) screws**.
* The 40mm assistant fan is purchased separately.
** When purchasing your assistant fan, ensure to check with your vendor for the assistant fan screws.
SABERTOOTH Z170 S
2
2-1