Program Procedures; Overview - Samsung iDCS 500 Programming Manual

iDCS 500
TECHNICAL MANUAL
PART 2. PROGRAM PROCEDURES

2.1 OVERVIEW

THE FOLLOWING INSTRUCTIONS FOR EACH MMC ASSUME THAT YOU HAVE
ALREADY OPENED PROGRAMMING.
HELPFUL HINT:
When you are finished programming in MMC codes 100–855 and have other
programming to do, press SPK to exit the MMC but stay in the programming mode and
use one of the following methods.
1. Dial another MMC code directly and continue programming.
2. Press VOLUME UP and DOWN keys to scroll through all MMC codes. When the
desired MMC code is reached, press SPK and continue programming.
Pressing TRSF will always save changes and exit the programming mode.
2.1.1
PROGRAMMING
PART 2 NOVEMBER 2001
HOME
PAGE
Table of
Contents
HELP