Samsung iDCS 500 Programming Manual page 97

iDCS 500
TECHNICAL MANUAL
MMC: 304
DESCRIPTION:
Allows trunks on a per-station basis the ability to answer incoming calls, to dial out
or to do both. If a station is set to NO Dial, the station will not have the ability to
place a call. If the station is set to NO Answer, the station cannot answer an
incoming call.
NOTE: MMC 406 Trunk Ring Assignment overrides this MMC for the Answer option.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 304
Display shows
2. Dial the station number (e.g., 205)
OR
Press UP or DOWN key to select station and
press RIGHT soft key
3. Dial the trunk ID number (e.g., 704)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key
4. Press UP or DOWN key to select YES/NO
option
OR
Dial 1 for YES or 0 for NO and press RIGHT
soft key to move cursor to ANS option
ASSIGN EXTENSION/TRUNK USE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
[201] USE [701]
DIAL:YES ANS:YES
[205] USE [701]
DIAL:YES ANS:YES
[205] USE [704]
DIAL:YES ANS:YES
[205] USE [704]
DIAL:NO ANS:YES
HOME
PAGE
Table of
Contents
HELP