Samsung iDCS 500 Programming Manual page 327

iDCS 500
TECHNICAL MANUAL
MMC: 733
DESCRIPTION:
Used to program each AA plan. A plan is a module that processes a call. There are
twelve plans available in each AA card. Each plan can route a caller to any group,
extension or another plan. Each port can answer calls with a different plan as
defined in MMC 735.
This MMC includes options to select messages to play to a caller. These messages
can be as follows:
MESSAGES 01–48
These can be created using the AAREC soft key (programmed on keysets by using
MMC 722 or 723). A total of two minutes of message time is available.
MESSAGES 49–64
These are pre-programmed as follows:
49 "Thank you for calling, please dial your party's extension number."
50 "Invalid number, please try again."
51 "I'm sorry, there is no answer."
52 "I'm sorry, that station is busy."
53 "One moment please."
54 "Transferring."
55 "I'll transfer you."
56 "Good-bye."
57 "Thank you."
58 "Please hold for the operator."
59 "Please hold for assistance."
60 "Thank you, good-bye."
61 "I'm sorry, all stations are presently busy."
62 "I'm sorry, all stations are still busy."
63 "Please call back later."
64 "I'm sorry, not a valid selection."
PROGRAMMING
PART 2 NOVEMBER 2001
AA PLAN TABLE
HOME
PAGE
Table of
Contents
HELP