Troubleshooting - NEC X431BT User Configuration Manual

Configuration for Using the X431BT*
(1920 x 480 Resolution Display)

Troubleshooting

Problem
The lower half of the display area is black.
Example of normal display
Example of incorrect display
The Media Player
program is not
Example of incorrect display
displayed correctly on
the display (X431BT)
The bottom half of the window is not displayed for the program display.
Example of normal display
Example of incorrect display
The bottom half of the OSD window is not displayed.
Example of normal display
The OSD menu of
Media Player is not
displayed correctly on
the display (X431BT).
Example of incorrect display
The bottom half of the start window is not displayed.
The start window of
Media Player is not
displayed correctly on
the display (X431BT).
Condition
DATE/TIME
NETWORK
PREVIEW
TIMER
LANGUAGE
VIDEO OUT
VIDEO IN
MEMORY CARD
IR CONTROL
SLIDE SHOW
DATE/TIME
NETWORK
PREVIEW
TIMER
LANGUAGE
VIDEO OUT
(3/3)
Cause and Remedy
Use the ASPECT button of the display remote
to set the aspect ratio of the display (X431BT)
to [TRIM].
ASPECT
The layout resolution setting for a program
created using the authoring software is
incorrect.
Set the layout resolution setting
of the program to [1920 x 480] or
[Undesignated(4:1)]
See page 2.
Use the ASPECT button of the display remote
to change the aspect ratio of the display
(X431BT) to [NORMAL]. When the OSD menu
is closed, return the setting to [TRIM].
ASPECT
This problem occurs because the aspect ratio
of the display (X431BT) is set to [TRIM]. There
is no problem so continue as normal.