Download
 Share
 Print this page
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Monitor
  5. MultiSync X431BT
  6. Installation manual

NEC X431BT Installation Manual

43” lcd display
Hide thumbs
   
1
2
3
4
5
6
  • Contents

Advertisement

Quick Links

x
Download this manual
Download this manual See also: User Manual
X431BT Installation Guide
43" LCD Display
Contents

Product Description

Type:
Resolution:
Aspect Ratio:
FCC:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
•
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
•
building codes. All mounts should make secure contact to wood studs.
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
•

Tilt Angle and Rotation

Below are the maximum angles that the monitor can be tilted either landscape or portrait orientation.
•
Only rotate the monitor in the clockwise direction to obtain portrait orientation.
•
www.necdisplay.com
LCD Display
1920 x 480
36:9
Class A
358.28 BTU/hour
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 5
Page 6
Screen Surface: Anti-Reflective
Dimensions without stand: 43.2"(W) x 11.8"(H) x 7.5"(D)
Weight without stand:
Power Consumption:
Rev 1.1
43.2 lbs
105 W (typ)
X431BT
Page 1 of 6

Advertisement

Table of Contents
loading

  Also See for NEC X431BT

NEC MultiSync X431BT User Manual
NEC MultiSync X431BT User Manual 39 pages
NEC E321 Installation And Assembly Manual
NEC E321 Installation And Assembly Manual 7 pages
NEC X431BT User Configuration Manual
NEC X431BT User Configuration Manual 3 pages

  Related Manuals for NEC X431BT

  Summary of Contents for NEC X431BT

  • Page 1: Table Of Contents

    Below are the maximum angles that the monitor can be tilted either landscape or portrait orientation. • Only rotate the monitor in the clockwise direction to obtain portrait orientation. • www.necdisplay.com NEC Display Solutions of America, Inc. Page 1 Page 1 Page 2 Page 3...

  • Page 2: Ventilation Requirements

    The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be • covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.

  • Page 3: Display Dimensions

    NEC Display Solutions of America, Inc. X431BT Installation Guide 43” LCD Display Rev 1.1 Display dimensions www.necdisplay.com X431BT Page 3 of 6...

  • Page 4: Rear & Bottom

    NEC Display Solutions of America, Inc. X431BT Installation Guide 43” LCD Display Rev 1.1 Display dimensions (cont.) Rating Label Serial EXIT INPUT MUTE www.necdisplay.com X431BT Page 4 of 6...

  • Page 5: Dimensions With Wall Mount Kit (Wmk-3257)

    NEC Display Solutions of America, Inc. X431BT Installation Guide 43” LCD Display Rev 1.1 Dimensions with Wall Mount Kit (WMK-3257) Rating Label Serial Input Panel Bottom: www.necdisplay.com X431BT Page 5 of 6...

  • Page 6: Control Codes

    SCREEN MODE: NORMAL FULL WIDE ZOOM AUTO SETUP EXECUTE FILM MODE AUTO NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Communication: Asynchronous Baud Rate: 9600 bps Data Length:...