How To Use; Getting Started; Blender Jar Assembly - Black & Decker BL2020S User Manual

10-speed die-cast blender
Table of Contents

Advertisement

Available languages

Available languages

How to Use

This product is for household use only.

GETTING STARTED

• Remove all packing material and any stickers from the product.
• Remove and save literature.
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING section of
this manual.
• Wipe outside of appliance with a damp cloth; dry thoroughly.

BLENDER JAR ASSEMBLY

1. Turn blending jar upside down and place flat on countertop or work surface.
2. Place the gasket against the glass jar. Important: Gasket
MUST be between the jar and blade assembly or the blender
will not function properly.
3. Place the blade assembly, blade first, into the jar. The
gasket should be between the blade assembly and the
blending jar (A).
4. Place jar base onto jar and rotate clockwise until it is tight
(B).
5. Turn assembled jar right side up.
6. Place lid with lid cap onto blending jar.
7. Uncoil power cord from storage area under the base.
Note: Do not plug in the cord.
8. Place jar assembly on base, making sure it is pressed firmly
into place.
(Jar base should not extend more than 1⁄8-inch above the rim
at the top
of the base.)
9. Blender is now ready for use.
USING YOUR BLENDER
1. Make sure appliance is Off.
2. Place foods to be blended into jar.
3. Place lid on jar; make sure lid cap is in place.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice, cheese, nuts and coffee beans, keep one hand on the lid to keep
blender in place.
5. Press the High or Low button; then select the speed that best suits your
desired task. To switch speeds, press the High or Low button and the new
speed desired. (See SPEED CHART on page 8.)
6. When blending thick mixtures, such as smoothies, power drinks and
milkshakes press the Pulse button several times to begin the blending
process. Press the Pulse button for no more than 5 seconds at a time.
This helps break up the ice and distribute the ingredients.
A
B
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bl2020r

Table of Contents