Move Media Screen (Source); Move Media Screen (Destination) - HP N1528A Installation And User Manual

Operation
These figures illustrate moving a cartridge from the tape drive to a slot in the
magazine:
1. Touch the Source input box or Source Element Type from the Move Media Screen.
The Source input box will change from gray to an active state. See
2. Touch the source you want to move, from the Source Element Type selections.
The options available are Drive and Slot.
Figure 4-8. Move Media Screen (Source)
3. Touch the Destination Input Box on the Move Media Screen. The Destination Input
Box changes from gray to an active state. See
Figure 4-9. Move Media Screen (Destination)
N1528A and N1529A ACL Tape Drive Installation and User's Guide—544594-003
Figure 4-9.
4 -7
Move Media
Figure 4-8.