6
Troubleshooting
This section includes:
Stuck Tape Removal Procedure
Platform Problems
Error Recovery
Error Recovery Procedures
Fault Symptom Codes (FSCs)
Stuck Tape Removal Procedure
Note. The shoe kit assembly is "hot swappable." The unit does not have to be powered off to
do this procedure.
1. Remove the shoe kit from the rear of the chassis. Two screws will need to be
unscrewed with a flat-head screwdriver. See
screws. After the screws are unscrewed, gently slide the shoe kit out of the
chassis.
Figure 6-1. Location of Screws on Shoe Kit
N1528A and N1529A ACL Tape Drive Installation and User's Guide—544594-003
6-1
6-5
6-5
6-7
6-7
Figure 6-1
Screws
6 -1
for the location of the