HP N1528A Installation And User Manual page 74

Troubleshooting
Table 6-2. Fault Symptom Codes
Message
Deactivation of a drive
failed
Drive removal failed
Drive is Active failed
Control Com
Unidentified
Drive status updated
failed
Loader command
execution failed
Sequential command
execution failed
Destination Xchg for
msg. was Null
Bad src mod in peg
msg
A Peg message has a
pointer to Null.
Xchg conversion
failed
Invalid L-drive number
to convert
Invalid P-drive number
to convert
Invalid mod number to
convert
N1528A and N1529A ACL Tape Drive Installation and User's Guide—544594-003
FSC ERP
700F C, G
7010 C, G
7012 C, G
7013 C, G
7014 C, G
7015 C, G
7016 C, G
7017 C, G
7018 C, G
7019 C, G
701A C, G
701B C, G
701C C, G
701D C, G
6- 14
Fault Symptom Codes (FSCs)
The Control task is indicating that a
request to deactivate a drive failed;
reason is not known.
The Drive task is indicating that a request
to power-down a drive failed; reason is
not known.
The Drive task is indicating that a request
to determine if a drive is executing a host
command failed; reason is not known.
During HotSwap, a command response
from the Control task could not be
associated with any outstanding
command.
The Drive task is indicating that a request
to determine the current state of a drive
failed; reason is not known.
The Loader task is indicating that a
command has failed to complete
successfully.
The Sequential task is indicating that a
command has failed to complete
successfully.
Attempting to send a message to a task,
but the argument exchange pointer was
Null.
A message was received from a remote
module, but the module number was out
of range.
Peg message wrapping a Null msg. ptr.
Attempt to determine the module number
containing the task that is returning a
command response failed.
Attempt to send a command to a drive,
but the logical drive number is out of
range.
Attempt to send a command to a drive,
but the physical drive number is out of
range.
Attempt to send a command to a drive in
a remote module, but the module number
is out of range.