Advertisement
M O D E L 4 3 0 – F R A M E D P A N E L S
You cannot use a
glass door of a framed Model 430. It is fine
when applying a panel to the solid door, but in
either instance, you should consider using raised
panels with a minimum 5/8" (16) thickness.
When using a raised framed panel, you must
allow for the edge to be routed
the panel to ensure a proper fit. Refer to
illustration 1.
With the framed Model 430, you will receive an
extruded handle identical in appearance to the
Built-In models. However, it will be an extended
handle and will enable you to use raised panels
without providing finger clearance to open the
door.
IMPORTANT NOTE: Wine Storage models with a
solid door are available as a special order and
require 90 days for delivery. When ordering
panels for a solid door unit, follow the overall
panel dimensions indicated; rail and stile dimen-
sions do not apply.
A solid panel must not be installed on a
glass door unit, as this may cause moisture
to form behind the panel.
1
/
"
Trim Reveal
4
(6) min
1
/
"
Rout to
thickness
4
(6)
Door
1
2
/
"
Frame
4
(57)
Rail/Stile
5
/
"
8
Glass
(16)
Illus. 1
62
1
/
" (6) panel to cover the
4
1
/
" (6) around
4
1
2
/
"
Rail / Stile
4
(57)
.10"
Spacer Panel
(3)
.10"
(3)
Overlay Panel
1
/
"
Backer Panel
4
(6)
5
/
"
16
(8)
min
Door Frame
Glass
5
/
"
32
(4)
Door / Grille
1
/
"
Trim
16
(2)
Illus. 2
M O D E L 4 3 0 – O V E R L A Y P A N E L S
Your overlay model will be shipped without
handle hardware and with an 11" (279) overlay
panel grille as standard equipment. You will need
to order a panel for the grille and hardware to
complement your surrounding cabinetry.
While the overlay panel design offers you a more
seamless appearance, you need to be aware of
adjacent cabinets and/or countertops when the
door is opened. Refer to the full-scale illustra-
tions at the end of the Built-In section.
To achieve the overlay look, you need three
different panels—the decorative overlay panel, a
0.10" (3) spacer panel and a
panel. Depending on your cabinet manufacturer,
this could be one panel routed for different
dimensions or more likely, three different panels.
Refer to the Overlay Panel Specifications for
complete details on the overlay sizing. In
addition, illustrations 2 and 3 will give you a
better idea of the panel construction and how it
interacts with our frame.
The glass door opening of the standard Model
430 is designed to be exposed to room air circu-
lation. Decorative overlays on the glass should
be kept to a minimum. Also, rails and stiles can
be increased in size but should not exceed
cabinet manufacturers' standard width. They
cannot exceed overall door panel dimensions
specified, as they would interfere with the oper-
ation of the door.
The back sides of rails and stiles that will be
visible through the glass door will need to be
finished. Also, the inside edges of the frames
must be finished to match the front surface.
Overlay Panel
Spacer Panel
5
/
"
8
min
(16)
Backer
Panel
1
.10"
/
"
(3)
4
(6)
Illus. 3
1
/
" (6) backer
4
Advertisement
