Download Print this page

Sub-Zero 695/F Design Manual page 19

Built-in
Hide thumbs Also See for 695/F:

Advertisement

G L A S S W E L L P A N E L O P T I O N S
If you choose not to use custom wood panels
above or below the glasswell for Model 685 or
695 framed application, a stainless steel insert
panel will be provided with the partial framed
accessory kit. This accessory kit (FRAMPAR),
includes partial framed molding and classic
stainless steel inset handle panel to provide a
spill-resistant finish above and below the glass-
well on the refrigerator door only. Refer to the
Framed Panel Specifications for this option on
page 21.
With the framed retrofit accessory kit, existing
Model 680 or 690 door panels can be used on a
new Model 685 or 695 framed unit. This acces-
sory kit (FRAMRET) includes framed retrofit
moldings and classic stainless steel inset handle
panels to accommodate existing Model 680 or
690 framed refrigerator and freezer door panels.
Both accessory kits are available through your
Sub-Zero dealer. See illustrations below.
Partial Framed Kit
Framed Retrofit Kit
FRAMPAR
FRAMRET
Dimensions in parentheses are in
millimeters unless otherwise specified.
O P T I O N A L P A N E L G R I L L E
An 11" (279) louvered grille is standard on
framed applications. Optional louvered grilles are
available in 1" (25) height increments from 10"
(254) to 15" (381) for all Built-In models except
Models 601R, 601RG, 601F, 648PRO and
648PROG.
You may choose to use Sub-Zero's optional
panel grille for some of your framed applications.
The panel grilles can be used with all Built-In
models except Models 601R, 601RG, 601F,
648PRO and 648PROG and are available in 1"
(25) height increments from 10" (254) to 15"
(381).
For each model, the width of the panel grille will
be the same, regardless of the height you have
chosen. To determine the panel grille insert size,
use the width dimension listed for your model
and the height dimension for the grille option
you have chosen. Specifications for the Panel
Grille Option are listed on page 21.
I N S T A L L A T I O N
To install framed
panels, see the
detailed procedures
outlined in the
Sub-Zero Built-In
Installation Guide.
19

Advertisement

loading