Table of Contents
Advertisement
About This Manual
Organization of This Manual
© National Instruments Corporation
This manual describes the mechanical and electrical aspects of the
DAQCard-1200 and contains information concerning its installation and
operation. The DAQCard-1200 is a compact, low-cost, low-power analog
input, analog output, digital, and timing I/O card for IBM PC/XT, PC AT,
and compatible computers that are equipped with a Type II PC Card socket.
The
DAQCard-1200 User Manual
•
Chapter 1, Introduction, describes the DAQCard-1200; lists what you
need to get started, the optional software, and optional equipment; and
explains how to unpack the DAQCard-1200.
•
Chapter 2,
Installation and
software configure the DAQCard-1200.
•
Chapter 3,
Signal
DAQCard-1200 I/O connector.
•
Chapter 4,
Theory of
functional unit of the DAQCard-1200.
•
Chapter 5, Calibration, discusses the calibration procedures for the
DAQCard-1200 analog I/O circuitry.
•
Appendix A, Specifications, lists the specifications of the
DAQCard-1200.
•
Appendix B,
Differences among the Lab-PC+, the DAQPad-1200,
and the
DAQCard-1200, contains a summary of the functional
differences among the Lab-PC+, the DAQPad-1200, and the
DAQCard-1200.
•
Appendix C,
Power-Management
power-management modes of the DAQCard-1200.
•
Appendix D,
PC Card Questions and
common questions and answers relating to PC Card operation.
•
Appendix E,
Technical Support
to request help from National Instruments or to comment on our
products and manuals.
is organized as follows:
Configuration, describes how to install and
Connections, describes the signals on the
Operation, explains the operation of each
Modes, describes the
Answers, contains a list of
Resources, contains forms you can use
ix
DAQCard-1200 User Manual
- Quick Links:
- About the Daqcard-1200
Hide quick links:
Advertisement
Table of Contents
