Initialization To Factory Settings - Sharp LC-26AF3 M/H/X Service Manual

10. Initialization to factory settings

Caution: In the factory settings, all user setting data including the channel settings are initialized. (The
adjustments made in the adjustment process mode are not initialized.) Keep this in mind when
initializing these settings.
After adjustment, exit the adjustment process mode as follows:
Unplug the AC power cord from the outlet to force off the power. (When the power is turned off with the
remote control, once unplug the AC power cord and after 10 seconds plug it in again.)
Adjustment item Adjustment conditions
1 Factory settings Turn off the AC power
to exit the adjustment
process mode.
Adjustment procedure
Use the [R/C] VOL UP key on Page 2 to turn "ON" INDUSTRY INIT and then
press [R/C] OK key.
"////////" appears and then "SUCCESS" appears if the setting is completed.
The followings are initialized to factory settings.
1) Use settings
2) Channel data (e.g. broadcast frequencies)
3) Manufacturer's option settings
4) Password data
31
LC-26AF3 M/H/X
LC-32AF3 M/H/X
LC-37AF3 M/H/X