Sharp LC-26AF3 M/H/X Service Manual page 32

LC-26AF3 M/H/X
LC-32AF3 M/H/X
LC-37AF3 M/H/X
11. Display adjustment procedure
11-1. Entering and exiting the display process mode
(1) Before entering the display process mode, press the "RESET" button or adjust the menu image to reset the
AV position.
(2) Unplug the AC power cord of the running TV set to force off the power.
(3) While holding down "VOL (+)" and "CH(Ù)" keys at once, plug in the AC power cord to turn on TV. The
letter "K" appears on the screen.
(4) Next, press either "VOL (+/-)" or "CH (Ù/ù)" of the remote control. Multiple lines of red characters appearing
onscreen indicate that the unit is now in the display process mode. If you fail to enter this mode (the display
is the same as normal startup), retry the procedure.
(5) To exit the display process mode after the adjustment is completed, unplug the AC cord to force off the
power. (When the power is turned off with the remote control, once unplug the AC cord and after 10
seconds plug it in again.)
Caution: Use due care in handling the information described here lest the users should know how to
enter the display process mode. If the setting is tampered with in this mode, unrecoverable
system damage may result.
11-2. Key function table in display process mode
Key
Function 1 (when on the left side of a page)
Cursor UP Moving up by one item or moving to the
'
previous page (when at the top)
Cursor DOWN
Moving down by one item or moving to the next
"
page (when at the bottom)
Cursor RIGHT Moving to the right by one item or moving to
|
another page (in the case of the initial page)
Cursor LEFT Moving to the left by one item or moving to
\
another page (in the case of the initial page)
ENTER Test pattern off
TV/VIDEO
Moving to the next page
CH (ù) Moving up by one item or moving to the
previous page (when at the top)
CH (Ù)
Moving down by one item or moving to the next
page (when at the bottom)
VOL (–)
Moving to the right by one item or moving to
another page (in the case of the initial page)
VOL (+) Moving to the left by one item or moving to
another page (in the case of the initial page)
Function 2 (when changing a numeric value)
Incrementing the adjustment value by one or
executing the item (in the case of W or R items)
Decrementing the adjustment value by one or
executing the item (in the case of W or R items)
Moving to the right by one item
Moving to the left by one item
Executing the item (in the case of W or R
items)
Moving to the next page
Incrementing the adjustment value by one or
executing the item (in the case of W or R items)
Decrementing the adjustment value by one or
executing the item (in the case of W or R items)
Moving to the right by one item
Moving to the left by one item
32