Qs Temperature Nvm Data Con?Rmation; Initialization To Factory Settings - Sharp LC-26SA1E Service Manual

LC-26SA1E/RU, LC-32SA1E/RU
[9] QS Temperature NVM Data Confirmation
During servicing of the LCD TV set , by software upgrading or by any cleaning NVM, itÅfs mandatory select the ÅgInch SettingÅh in Service Mode,
Page 2, according to the size of the TV set.

[10] Initialization to factory settings

Caution: When the factory settings have been made, all user setting data, including the channel settings, are initialized. (The adjust-
ments done in the adjustment process mode are not initialized.) Keep this in mind when initializing these settings.
Adjustment item
1 Factory settings
After adjustments, exit the adjustment process mode.
To exit the adjustment process mode, unplug the AC power cord from the outlet to forcibly turn off the power.
When the power is turned off with the remoto control, unpulug the AC power cord and plug it back in.
Adjustment conditions
Forcibly turn off the power
(See to below caution)
Adjustment procedure
•Enter the adjustment process mode.
•Move the cursor to [Factory Init] on page 2/11.
•Use the R/C
key to select a region from [EURO/UK/ITALY/
FRANCE/RUSSIA]and press the [OK] key.
"EXECUTING" appears and initialization starts.
After a while,"***OK***" appears and the setting is complete.
Note: Never turn the power off during initialization.
•The following items are initialized in the factory setting.
1. User settings
2. Channel data (e.g. broadcast frequencies)
3. Password data
5 – 17