Initialization To Factory Settings - Sharp LC-32GA3E Service Manual

9. Initialization to factory settings

Caution: When initialization is performed, all user setting data including the channel settings are
initialized. Be cautious when making this adjustment.
(The adjustments done in the adjustment process mode are not initialized.)
Adjustment item
1 Initialization
After the adjustment, cancel the adjustment process mode.
To exit the adjustment process mode, unplug the AC power cable from the outlet to make a forced
shutdown. (When the power was turned off with the remote controller, once unplug the power cable
and plug it again. In this case, wait 10 seconds or so before plugging.)
Adjustment conditions
Enter the adjustment process mode.
It turns off with AC pow-
Bring the cursor on to [INDUSTRY INIT] in page 2/16.
er supply.
Select [ON] using the VOLUME [+/-] key and press the [OK] key.
Initialization is executed. When the unit automatically exits from the
process adjustment mode and the display appears on the TV, initialization
is complete.
* Never shut off the power during the initialization process.
The following settings are initialized in this adjustment.
1. User setting
2. Channel data (e.g. broadcast frequencies)
3. Operation time
4. Maker's optional setting
5. Password data
Adjustment procedure
29
LC-32GA3E
LC-37GA3E