Sharp LC-26AF3 M/H/X Service Manual page 22

LC-26AF3 M/H/X
LC-32AF3 M/H/X
LC-37AF3 M/H/X
<Step 5>
The rewriting program (IAP Writer) on the PC dictates writing. (Writing conditions are indicated on the
IAP Writer.)
<Step 6>
Wait until Step 5 is ended.
<Step 7>
When ended, exit the IAP Writer.
<Step 8>
Turn off the AC power of the unit. (Unplug the AC cord.)
<Step 9>
Remove the cable from the jig PWB and the main PWB.
<Step 10>
Turn on the Ac power of the unit to check for operation.
(If INPUT SELECT and volume control are available, rewriting is completed.)
3. Entering and exiting the adjustment process mode
(1) Before entering the adjustment process mode, press the "RESET" button or adjust the menu image to reset
the AV position.
(2) Unplug the AC power cord of the running TV to force off the power.
(3) While holding down "VOL (-)" and "TV/VIDEO" keys at once, plug in the AC power cord to turn on TV. The
letter K appears on the upper left of the screen.
(4) Next, hold down the "VOL (-)" and "CH (Ù)" keys at once. Multiple lines of blue characters appearing
onscreen indicate that the unit is now in the adjustment process mode. If you fail to enter this mode (the
display is the same as normal startup), retry the procedure.
(5) To exit the adjustment process mode after adjustment is completed, unplug the AC cord to force off the
power. (When the power is turned off with the remote control, once plug the AC cord and after approx. 10
seconds plug it in again.)
Caution: Use due care in handling the information described here lest the users should know
how to enter the adjustment process mode. If the setting is tampered with in this
mode, unrecoverable system damage may result.
22