Qualcast rm32 Instruction Manual page 8

► If the lawn mower begins to vibrate abnormally, switch it off immediately ,
disconnect the plug immediately and check it carefully.
► Ensure that all the nuts, bolts and screws are tight and that the mower is in
a safe condition for use.
► Switch off the motor and disconnect the plug from the power supply if the
mower strikes a foreign body. Check the mower for signs of damage and
carry out the necessary repair work before you start work with the mower
again.
► Do not leave the mower out in the rain. The lawn must not be wet or very
damp.
► Ensure that you have safe footing at all times whilst working with the
mower.
► Only push the mower at a normal walking pace.
► Be particularly careful when changing direction with the mower whilst
working on a slope.
► Be particularly careful when you change the direction of the mower or pull
it towards you.
► Switch off the mower if it has to be tilted for transport purposes, when you
have to take it over surfaces other than grass, and when moving the
mower to and from the area you wishto mow.
► Carefully actuate the starter switch in accordance with the manufacturer's
instructions. Make sure you keep your feet at a safe distance from the
mower blade! Do not stand near the grass ejection chute if the grass
collector is not fitted.
► Do not touch the cutting blade until the machine has been disconnected
from the mains and the cutting blade has reached a complete standstill.
► Never lift or carry the mower whilst the motor is running.
► Switch off the motor and disconnect the plug before you leave the lawn
mower.
► Check the grass collector at regular intervals for signs of wear and to
ensure that it is still in perfect working order.
► Before you adjust or clean the mower or check whether the mains lead is
kinked or damaged, switch off the mower and disconnect the plug from
the power supply.