Connecting Hdmi Equipment - Pioneer Elite PRO-FHD1 Operating Instructions Manual

Using External Equipment
11
Input signal correlation table
720*480p@59.94/60 Hz
720(1440)*480i@59.94/60 Hz
For audio, the Plasma Display supports the following:
• Linear PCM (STEREO 2ch)
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
NOTE
• PC signals are out of correspondence.
• HDMI input display on top right corner of the Plasma Display
(blue box) everytime the external devices changing the
output format, this might causing the blank screen while
detecting the signal format.

Connecting HDMI equipment

When using the INPUT2 or INPUT3 HDMI terminal:
INPUT2 INPUT3
HDMI HDMI
HDMI cable having the
HDMI mark
(commercially available.)
To activate the HDMI terminal:
When you use the INPUT2 or INPUT3 HDMI terminal, use the
following procedure to activate the terminal.
1
Press HOME MENU.
2
Select "Setup" ( /
3
Select "INPUT2" or "INPUT3" ( /
DISP.)).
4
Select "Video" or "Audio" ( / ).
5
Set the "Video" or "Audio" setting.
6
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
To specify the type of digital video signals:
1
Repeat steps 1 to 2 provided for "To activate the HDMI
terminal".
2
Select "Video" ( / ).
3
Select the type of digital video signals ( / ).
34
En
INPUT2 INPUT3
R L R L
AUDIO cable
(commercially available.)
Connect the AUDIO cable only
when inputting analogue audio
signals.
HDMI equipment
then ENTER (ENTER/DISP.)).
then ENTER (ENTER/
• If you select "Auto", an attempt will be made to identify
the type of digital video signals when digital video
signals are received.
Item Description
Auto Automatically identifies input digital video signals.
Color-1
Digital Component Video signals (4:2:2) locked
Color-2 Digital Component Video signals (4:4:4) locked
Color-3 Digital RGB signals (16 to 235) locked
Color-4
Digital RGB signals (0 to 255) locked
4
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
• If you select a parameter other than "Auto", make such a
setting that results in natural color.
• If the images do not come in clearly, specify another digital
video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
To specify the type of audio signals:
When you use the INPUT2 or INPUT3 HDMI terminal, use the
following procedure to specify the type of audio signals.
1
Repeat steps 1 to 2 provided for "To activate the HDMI
terminal".
2
Select "Audio" ( / ).
3
Select the type of audio signals ( / ).
• If you select "Auto", an attempt will be made to identify
the type of audio signals when audio signals are
received.
Item Description
Auto Automatically identifies input audio signals.
Digital Accepts digital audio signals.
Analogue
Accepts analogue audio signals.
4
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the
operation manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analogue audio cables.