Controls And Starting A Wash - Fisher & Paykel DW60CE Installation Instructions And User Manual

Controls and starting a wash - CE models
16
On/Off and
Keylock
Control panel feature
On/Off
Keylock
delay Delay
start
07
Display
Rinse aid
indicator
Heater
indicator
07
delay
Delay Display
start
Turns the power to the dishwasher
on and off.
This disables all the buttons so a
wash cannot accidentally be
started e.g. by children playing,
someone leaning against the
control panel, or during cleaning.
Delay start is useful if you want to
set your dishwasher to start a
wash programme automatically
later (e.g. while you are away from
home).
This shows:
the remaining wash time in minutes
the delay time in hours (if Delay start is set)
fault codes
Keylock has been activated (
This will light up when the rinse
aid level is low.
This will light up when the dishwasher is heating the water.
Heater Rinse aid
indicator indicator
Action to take
Press
dishwasher on and off.
To activate or cancel Keylock,
press and hold
(until you hear a long beep).
will show in the display when the
Keylock has been activated.
To set Delay start, press the
button until the display shows
the desired delay time (in hours).
The counting will restart after 12
hours.
LOC
will be displayed).
When the indicator lights up,
refill rinse aid. See 'Using rinse
aid' for instructions.
briefly to turn the
for 3 seconds
LOC
delay