NAPCO Gemini GEM-DXRP1 Operating Manual page 9

P R O T E C T I N G Y O U R S E L F W H I L E O N T H E P R E M I S E S
Easy Exit
(Optional - Easy Exit programmed?
Your system may have been programmed for Easy Exit, which allows a user to exit the premises while the system is armed. By
activating Easy Exit while the system is armed, the Exit Delay countdown will take place, during which time you are permitted to leave
through the exit door. The Easy Exit Delay time will be identical to the Exit Delay time the system gives you each time it is armed.
This will allow, for example, an early morning commuter to exit the house, without having to disarm and rearm the system, awaking the
family.
Press to activate Easy Exit on your system.
E
D
Press to activate Easy Exit on your system.
YES NO)
(GEM-P3200/GEM-P9600 V20 or greater, GEM-P816/P1632 V9A or greater)
Emergency Buttons
The Blue Emergency Buttons (
whether the system is armed or disarmed. The emergency signal will only be transmitted
when an Emergency Button and
•
Fire Emergency Simultaneously press
emergency. *(Fire Emergency programmed?
•
Auxiliary Emergency Simultaneously press
an Auxiliary emergency. *(Auxiliary Emergency programmed?
•
Police Emergency Simultaneously press
police emergency. *(Police Emergency programmed?
(GEM-P3200/GEM-P9600 V11D or less, GEM-P1632 V8G or less)
(Only available if programmed)
, &
7 8 9
are pressed at the same time.
G
and
7
YES
8
and
9
), if programmed, are always active,
to alert the central station of a fire
G
NO)
and to alert the central station of
G
YES NO)
to alert the central station of a
G
YES NO)
9