Chamber Temperature Setting - Panasonic MDF-U4186S Series Operating Instructions Manual

CHAMBER TEMPERATURE SETTING

Table 1 shows the basic operation method. Perform key operations in the sequence indicated in the
table.
The example in the table is the explanation based on the assumption that the temperature is –75
*The unit is set at the factory that the chamber temperature is -80
Table 1. Basic operation sequence (Example: When the settlement of chamber temperature is
changed from -80
Description of operation
1 Turn on the power switch.
Press temperature setting key
2 when changing the set temperature
during operation.
Set the second digit to 7 with the
3
numerical value shift key.
By pressing the digit shift key, set
4
the first digit.
Set the first digit to 5 with the
5
numerical value shift key.
6 Press enter key.
Note: The temperature set mode returns to the temperature display mode automatically when 90
seconds has passed without any key operation.
o o
C to -75 C.)
Key operated
o
C .
Indication after operation
The current chamber temperature is
-----
displayed.
PV/SV The second digits blinks.
When pressed, the figure of settable
digit changes.
The first digit blinks.
When pressed, the figure of settable
digit changes.
Set temperature is memorized and
ENT the current chamber temperature
is displayed.
15
o
C .