Installation Notes; Selecting Dowels And Screws; Recommended Screws; Fitting The Wall Bracket - Fronius Symo 3.0-3-S Operating Instructions Manual
Grid-connected inverter
Hide thumbs
Also See for Symo 3.0-3-S:
- Operating instructions manual (196 pages) ,
- Installation manual (60 pages) ,
- Installation instruction (60 pages)
Table of Contents
Advertisement
Installation notes
Selecting dowels
IMPORTANT! Depending on the surface, different dowels and screws may be required for
and screws
installing the wall bracket. Therefore, these dowels and screws are not part of the scope of
supply for the inverter. The system installer is responsible for selecting the proper dowels
and screws.
Recommended
To install the inverter, the manufacturer recommends the use of steel or aluminium screws
screws
with a diameter of 6 - 8 mm.
Fitting the wall
bracket
NOTE! When fitting the wall bracket to the wall, ensure that the wall bracket does
not become warped or deformed.
7
Advertisement
Table of Contents
