Connection Overview - BMW 5 Series Saloon Installation Instuctions

4.

Connection overview

Item
A Basic wiring harness
Coaxial socket casing FME
A1
Black 12-pin plug connector
A2
Socket contact
A3
Signal: Mute
Black 18-pin socket casing
A4
Black 3-pin socket casing
A5
Black 3-pin socket casing
A6
Coaxial socket casing FME
A7
A8 Floating fuse
Signal: Terminal 30
A9 Black 12-pin plug connector
A10 Socket contact
Signal: Mute
A11 Cable eyelet, 6 mm in diameter
Signal: Terminal 31
Retrofit/Installation kit No. 65 90 0 028 873 84 64 25,805 (others see cover sheet)
Installation Instructions no. 01 29 0 029 541 01 29 0 029 544
Description
Cable
colour
-
- To coaxial plug casing FME on the required load holder
with the hands-free kit or to the required adapter
-
Cars without an on-board monitor radio only:
To radio connection plug (after disconnecting the black
12-pin plug casing X13598 from the radio connection plug)
Cars with an on-board monitor radio only:
Tie back (no longer required)
white/brown
Cars without an on-board monitor radio and without
an existing mute cable on the radio connection plug
only:
To radio connection plug PIN10 , in the 8-pin plug casing
X18126
Cars without an on-board monitor radio and with an
existing mute cable on the radio connection plug
only:
Cut off, connect to the supply cable of the radio connection
plug PIN10 , white/brown cable, in the 8-pin plug casing
X18126 using a 2-way insulation-piercing connector (1)
Cars with an on-board monitor radio only:
Tie back (no longer required)
To the adapter cable required for the hands-free kit,
---
behind the rear module holder
To the microphone required for the hands-free kit, in the
---
headlining
To cable compensator in the boot on the left if the car is
---
fitted with a cable compensator (if not, insulate and tie back)
To the coaxial plug casing FME on the FME connector (4)
in the boot on the left (connection for telephone aerial); if
---
you are upgrading the car with a cable compensator, to
the cable compensator or to the required adapter
red To the standard wiring harness near the left tail light
Cars without an on-board monitor radio only:
Tie back (no longer required)
Cars with an on-board monitor radio only:
---
To radio connection plug (after disconnecting the black
12-pin plug casing X13598 from the radio connection
plug)
white/brown
Cars without an on-board monitor radio only:
Tie back (no longer required)
Cars with an on-board monitor radio and without an
existing mute cable on the radio connection plug
only:
To radio connection plug PIN10 , in the 8-pin plug casing
X18126
Cars with an on-board monitor radio and with an
existing mute cable on the radio connection plug
only:
Cut off, connect to the supply cable of the on-board
monitor radio connection plug PIN10 , white/brown
cable, in the 8-pin plug casing X18126 using a 2-way
insulation-piercing connector (1)
brown in E39 cars to the earth post X10305
in E39/2 cars to the earth post X13016
Issue date: 04.2001
Connection location in the car
----
EN/7