Safe Riding Recommendation For Motorcycle Riders - Suzuki dl650 Owner's Manual

MODIFICATION
Modification of the motorcycle,
01
removal of original equipment ma)
render the vehicle unsafe or illegal.
The frame of this motorcycle is madc
of an aluminium alloy. Therefore
never make any modifications such a$
drilling or welding to the frame as i.
weakens the strength of the framc
significantly. Failure to heed this warn.
ing could result in an unsafe vehiclc
operating condition and subsequen
accident. Suzuki will not be responsi'
ble in any way for personal injury
01
damage to the motorcycle caused b)
frame modifications. Bolt on access0
ries that do not modify the frame ir
any way may be installed providec
that the GVW is not exceeded.
Modification to an aluminurn alloy
frame, such as drilling or welding,
weakens the frame. This could
result in an unsafe operating con-
dition and may lead to an acci-
dent.
Never make any modifications to
the frame.
SAFE RIDING RECOMMENDATION
FOR MOTORCYCLE RIDERS
Motorcycle riding is great fun and an
exciting sport. Motorcycle riding also
requires that some extra precautions
be taken to ensure the safety of the
rider and passenger. These precau-
tions are:
WEAR A HELMET
Motorcycle safety equipment starts
with a quality helmet. One of the most
serious injuries that can happen is a
head injury. ALWAYS wear a properly
approved helmet. You should also
wear suitable eye protection.
RIDING APPAREL
Loose, fancy clothing can be uncom-
fortable and unsafe when riding your
motorcycle. Choose good quality
motorcycle riding apparel when riding
your motorcycle.
INSPECTION BEFORE RIDING
Review thoroughly the instructions in
the "INSPECTION BEFORE RIDING"
section of this manual. Do not forget
to perform an entire safety inspection
to ensure the safety of the rider and
its passenger.
FAMILIARIZE YOURSELF WITH
THE MOTORCYCLE
Your riding skill and your mechanical
knowledge form the foundation for
safe riding practices. We suggest that
you practice riding your motorcycle in
a non-traffic situation until you are
thoroughly familiar with your machine
and its controls. Remember practice
makes perfect.