Suzuki dl650 Owner's Manual page 68

.
. . .
the brake several times to reston
the proper lever stroke.
Failure to extend brake pads after
installing the wheel can cause
poor braking performance and
may result in an accident.
Before riding, "pump" the brake
repeatedly until brake pads are
pressed against the brake disks
and proper leverlpedal stroke and
firm feel are restored. Also check
that the wheel rotates freely.
Installing the front wheel in the
reverse direction can be hazard-
ous. The tire for this motorcycle is
directional. Therefore, the motor-
cycle may have unusual handling
if the wheel is installed incorrectly.
Install the front wheel in a speci-
fied direction, as indicated by the
Failure to torque bolts and nuts
properly could lead to an accident.
Torque bolts and nuts to the
proper specifications. If you are
not sure of the proper procedure,
have your authorized SUZUKl
dealer or qualified mechanic do
this.
Front axle holder bolt tightening
torque:
23 N m (2.3 kgf-m, 16.5 Ib-ft)
Front brake caliper mounting bolt
tightening torque:
39 N m (3.9 kgf-m, 28.0 Ib-ft)
10.After installina the wheel, a ~ ~ l y
?
J
I
J
I
67
Front axle tightening torque:
65 N m (6.5 kgf-m, 47.0 Ib-ft)