Basic Play - Panasonic DVD-S54 Operating Instructions Manual

Basic play

Power ON.
Load the disc.
• Load double-sided discs so
the label for the side you
want to play is facing up.
Skip
• Press [u i] to skip titles, chapters, tracks, etc.
• Can also skip to the markers.
DVD-VR
Stop
The position is memorized when "RESUME STOP" is
displayed on your television screen.
• Press [q] (PLAY) to resume. (Resume play)
• Press [g] to clear the position.
Standby/on switch ( )
8
Press to switch the unit from on to standby mode or vice versa. In standby mode, the
unit is still consuming a small amount of power.
Standby/on indicator (^)
When the unit is connected to the AC mains supply, this indicator lights up in standby
mode and goes out when the unit is turned on.
RQTC0157-E.indd 9
Remote control sensor
Stop
Note
• DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [g]
when you finish to preserve the unit's motor and your television screen.
• To play or
MP3
( page 18, "OTHERS" menu).
• Total title number may not be displayed properly on 4R/4RW.
If you are experiencing problems, refer to "Troubleshooting guide" ( page 21 to 23).
Open the disc tray.
Start play.
Search
(during play)
Slow-motion
(during pause)
• Up to 5 steps
• Press [q] (PLAY) to restart play.
VCD • Slow-motion: Forward direction only
Slow-motion: Does not work.
MPEG4 DivX
Pause
• Press [q] (PLAY) to restart play.
JPEG contents on DVD-RAM, set "DVD-VR/DATA" to "DATA"
OPEN/CLOSE
9
2007-12-11 9:57:20