Panasonic DVD-S54 Operating Instructions Manual page 22

Troubleshooting guide
Progressive video
There is ghosting • This problem is caused by the editing method or material
when progressive or
used on DVD-Video, but should be corrected if you use
HDMI output is on. interlace output. Change "VIDEO OUT (I/P)" in "VIDEO"
menu to "INTERLACE". (17)
Pictures not in
• If the unit is connected to the television through VIDEO OUT,
progressive output. S VIDEO OUT, or AV terminal, output will be interlace.
Specific operation impossible or incorrect
It takes time before
• Play may take time to begin when an MP3 track has still
play starts. picture data. Even after the track starts, the correct play time
will not be displayed, however this is normal.
MP3 DivX
• This is normal on DivX video.
The program • These functions do not work with some DVD-Videos.
functions do not
work.
Menu doesn't • Press [g] twice and then press [q] (PLAY).
appear.
VCD with
playback control
Play doesn't start. • If a disc contains CD-DA and other formats, proper playback
may not be possible.
• This unit may not play WMA and MPEG4 that contains still
picture data.
• If playing DivX VOD content, refer to the home page where
you purchased it. (Example: www.divx.com/vod)
No subtitles. Display the subtitles. (13)
•
In A-B Repeat, point • The end of an item becomes point B when it is reached.
B is automatically set.
Repeat play is
• A-B Repeat is canceled when you press [QUICK REPLAY].
automatically • Repeat play may be canceled when you press [MANUAL
canceled. SKIP].
22
RQTC0157-E.indd 22
Recording
Cannot record to
• You cannot record WMA/MP3.
digital recording • You cannot record DVDs that have protection preventing
equipment. digital recording.
(Incorrect sound • You cannot record DVDs if the recording equipment cannot
recorded.) handle signals with a sampling frequency of 48 kHz.
• Make the following settings:
– ADVANCED SURROUND:
– PCM OUTPUT:
– DOLBY DIGITAL:
– DTS:
Picture incorrect
Picture distorted. • Ensure that the unit is not connected through a video
cassette recorder. (6)
• Make sure that progressive output has not been selected
when the connected television is not progressive compatible.
Press and hold [RETURN] until the picture displays correctly.
The settings will return to "INTERLACE".
• Change "SOURCE SELECT" in On-Screen Menu 2.
DivX
(15)
Picture size doesn't • Change "TV ASPECT" in "VIDEO" menu. (17)
fit the screen. • Use the television to change the aspect. If your television
does not have that function, change "TV ASPECT". (17)
• Change the zoom setting. (14)
Picture stops.
• Picture may stop if the DivX files are greater than 2GB.
The television may • The unit and television are using different video systems.
display incorrectly • The system used on the disc doesn't match your television.
or colours appear
–PAL discs cannot be correctly viewed on an NTSC
faded. television.
–This unit can convert NTSC signals to PAL60 for viewing
on a PAL television ("NTSC DISC OUT" in "VIDEO" menu).
(17)
• Connect to a progressive output compatible television to
enjoy progressive video.
• Picture may not be seen when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
Menu not displayed Restore the zoom ratio to "NORMAL". (14)
•
correctly. • Change "TV ASPECT" in "VIDEO" menu. (17)
OFF (13)
UP TO 48kHz (18)
PCM (18)
PCM (18)
2007-12-11 9:57:41