Hitachi C 10FSH Safety Instructions And Instruction Manual page 5

2.
Remove all packing materials attached or connected to the tool before attempting to operate it.
3.
Always confi rm that the POWER TOOL is clean before using it.
4.
Always wear snug-fi tting clothing, non-skid footwear (preferably with steel toes) and eye protection when
operating the POWER TOOL.
5.
Always handle the POWER TOOL carefully. If the POWER TOOL falls or strikes against a hard object, it might
become deformed or cracked or sustain other damage.
6.
Always cease operating the saw at once, if you notice any abnormality whatsoever.
7.
Always confi rm that all components are mounted properly and securely before using the tool.
8.
When replacing the saw blade, always confi rm that the rpm rating of the new blade is correct for use on this tool.
9.
Always shut off the power and wait for the saw blade to completely stop rotating before doing any maintenance
or adjustments.
10.
During slide cutting, always push the saw blade away from the operator.
11.
Always clamp or otherwise secure the workpiece to the fence; otherwise the workpiece might be thrust form
the table and cause bodily harm.
12.
During miter or bevel cutting, always wait for the rotation of the blade to stop completely before lifting the saw
blade.
13.
Always make a trial run fi rst before attempting any new use of the saw.
14.
Always handle the saw blade with care when dismounting and mounting it.
15.
Always confi rm that the workpiece is free of nails or other foreign objects before beginning a cut.
16.
Always keep your hands out of the path of the saw blade.
17.
Always confi rm that the lower guard is in the proper place before using the saw.
18.
Always confi rm that the lower guard does not obstruct the sliding motion of the saw before attempting slide
cutting.
19.
Inspect the tool power cords periodically.
20.
Always confi rm that the proper lengths and types of extension cords are being utilized, if necessary, before
starting the tool.
21.
Always confi rm that the motor air vents are fully open before using the tool.
22.
Always wait until the motor has reached full speed before starting a cut.
23.
Always keep the handles dry, clean and free of oil and grease. Hold the tool fi rmly when in use.
24.
Always use outboard stands to provide support for long workpieces that overhang the table of the slide
compound miter saw.
25.
Always operate the tool after ensuring the workpiece is fi xed properly with a vise assembly.
26.
The operating instructions provided with the tool shall direct the user to secure the tool to supporting structure
if, during normal operation, there is a tendency for the tool to tip over, slide, or walk on the supporting surface.
DON'Ts
NEVER VIOLATE THE FOLLOWING RULES TO ASSURE SAFE USE OF THIS TOOL:
1.
Never operate the POWER TOOL unless you fully understand the operating instructions contained in this
Manual.
2.
Never leave the POWER TOOL unattended without fi rst unplugging the power cord.
3.
Never operate the POWER TOOL when you are tired, after you have taken any medications, or have consumed
any alcoholic beverages.
4.
Never use the POWER TOOL for applications not specifi ed in the instruction manual.
5.
Never operate the tool while wearing loose clothing, a necktie or jewelry, or while your hair is uncovered, to
protect against getting caught in the moving machinery.
6.
Never reach around the saw blade.
English
5