Webdav Client Settings] - Konica Minolta bizhub c280 User Manual

4.8 Sending scanned data to the WebDAV server
4.8.2

[WebDAV Client Settings]

In the administrator mode of PageScope Web Connection, select [Network] ö [WebDAV Settings] ö [Web-
DAV Client Settings].
Item
[WebDAV TX Set-
ting]
[Proxy Server Ad-
dress]
[Proxy Server Port
Number]
[User Name]
[Password is
changed.]
[Password]
[Chunk Transmis-
sion]
[Connection Time-
out]
[Server Authentica-
tion Character
Code]
bizhub C360/C280/C220
Description
Select [ON].
To perform transmissions via a proxy server, enter its ad-
dress.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can
enter the host name instead.
When using IPv6, you can specify the IPv6 address.
Enter the port number of a proxy server.
Enter the user name to log in to the proxy server (up to 63
characters).
Select this check box to change the password.
Enter the password to log in to the proxy server (up to 63
characters).
Select whether to enable chunk TX (batch transmission) or
non-chunk TX (split transmission) when sending data to
the WebDAV server.
By default, it is set to [Non-Chunk Transmission]. Change
the setting to fit the target WebDAV server.
Enter the timeout period for a communication with a serv-
er.
Select a character code to perform the authentication un-
der the WebDAV server.
You can use this setting when [Japanese] is specified for
the language to be displayed on the Control Panel.
4
Prior check
Server address
Server port number
Method supported
by the server
4-31