Sending Scanned Data To The User's E-Mail Address (Scan To Me); Tcp/Ip Settings] - Konica Minolta bizhub c280 User Manual

4.4

Sending scanned data to the user's E-mail address (Scan to Me)

4.4 Sending scanned data to the user's E-mail address (Scan to Me)
Configure settings to send scanned data to the user's E-mail address.
This function is available when user authentication is enabled and the E-mail address is registered as user
information.
If the login user's E-mail address is registered, [Me] is displayed in the address book. Specify [Me] for the
address to enable you to easily send data to your E-mail address.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Do you have an
SSL/TLS communi-
cation with the
SMTP server?
Yes
SMTP over
SSL/Start TLS
d
Reference
For details on how to send a file to the user's own E-mail address, refer to the [User's Guide Network
Scan/Fax/Network Fax Operations].
4.4.1

[TCP/IP Settings]

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-3.
bizhub C360/C280/C220
[TCP/IP Settings]
User Authentica-
tion
Scan to E-Mail
SMTP authenti-
cation?
No Yes
SMTP Authenti-
cation
Finish
POP before
SMTP?
No Yes
POP before SMTP
(1) POP over SSL?
(2) APOP?
Yes
(1) POP over SSL
(2) APOP Authenti-
cation
4
No
No
4-19