Loading Paper - HP 7470A Operator's Manual

Loading Paper

is
This plotter
other paper may cause poor line quality. For best results, order papers
listed under Accessories Available. To load paper, proceed as follows:
1. Set the
A4/US
paper size being used:
English paper.
NOTE:
The plotter senses a change
switch only when default conditions are subsequently established by
one of the following methods:
power-up initialization,
•
execution of HP-GL command IN,
•
moving the paper loading lever to the
•
simultaneously pressing
2. Move the paper loading lever to the
raises the pinch wheels and the paper stop. It also stores and caps
the pen avoid getting ink on the new paper.
to
3. Lay a sheet of paper on the platen surface so the paper
the paper stop and the left edge of the platen.
4. Move the paper loading lever to the
lowers the pinch wheels and the paper stop to secure the paper and
allow it free movement in the X-axis.
designed be used with HP paper and pens. Use of
to
switch the position which corresponds with the
to
for ISO A4 metric paper;.
104
ENTER
Loading Paper
us
in
the position of the
PAPER LOAD I
and (front-panel reset)
VIEW
PAPER LOAD I
PAPER HOLD I
for ANSI A
M/US
position, then
.•
position. This
is
against
position. This
17