Sigma dp3 Quattro User Manual page 77

1
Capture Settings] (P.27) → [Auto Bracketing] → [Bracketing
Select [
Amount], and press the
2
Use the buttons to set the bracketing amount.
It can be set in 1/3 stop increments up to ±3

The camera will take three pictures in the following sequence;

Appropriate exposure, under exposure and over exposure.
The operations in each Drive Mode are shown below.

Single Capture
Continuous
Self Timer
2 sec.
Self Timer
10 sec.
CAUTION !!
This function cannot be used with the interval timer shooting.

The exposure bracketing can be used with 4 different modes.

P Mode Both shutter speed and aperture value will be changed.
A Mode
Only shutter speed will be changed.
S Mode Only aperture value will be changed.
M Mode
Only shutter speed will be changed.
button or the
3
Press the button to confirm, press the shutter button
''half-way'' to return to shooting mode. (The Auto
Bracketing icon will be displayed on the bottom right
corner of the LCD monitor.)
Each time the shutter button is pressed, an image will
be taken one frame at a time.
Three frames will be taken continuously by pressing
and holding the shutter button.
2 seconds after pressing the shutter button, three
frames will be taken continuously.
10 seconds after pressing the shutter button, three
frames will be taken continuously.
button.
77