Sigma dp3 Quattro User Manual page 38

TO REMOVE THE CARD
WARNING!!
While the Busy Lamp is on or flashing, do not take out the battery or the

card. By doing so, it may result in data loss. This could also cause
damage to the camera and/or memory card.
TIP
If the camera is turned off while the Busy Lamp is on, the camera will

remain on until it has finished accessing the card.
38
1
Turn off the camera and open the Card /
USB cover as shown.
2
Push the card until it clicks and pull out it.
3
Close the Card / USB cover.