Sd Memory Card - Sigma dp3 Quattro User Manual

If the camera turns off, please leave it switched off for more than ten

minutes to lower its temperature.
Image quality may lower when the camera gets hot. If the warning mark

( ) is displayed, we recommend turning off the camera and wait until the
temperature of the camera becomes lower.

SD MEMORY CARD

(sold separately)
The dp3 Quattro camera uses a SD memory card, SDHC memory card*
and SDXC memory card*.
* UHS-1 standard memory card can also be used.
In this instruction manual, SD memory card, SDHC memory card and

SDXC memory card are referred to as the 'Card'.
We recommend using the SDHC memory card or SDXC memory card to

store images.
SD memory card, SDHC memory card or SDXC

memory card incorporate the write protection switch,
which prevents writing or formatting the card
accidentally. If the switch is placed in the 'LOCK'
position, it is not possible to overwrite or erase your
data accidentally.
Do not leave the card in direct sunlight or near a heating device.

Avoid storing cards in environments of high temperature and humidity or

where static electricity or electromagnetic fields may be generated.
For proper usage of the card, please refer to their instruction manuals.

The "Delete" feature of the Camera and PC may not delete the data in the

memory card completely. Some data might still remain. If you wish to
remove all data from card securely, please use third party software.
11