Sigma dp3 Quattro User Manual page 68

1
Select [ Capture Settings] (P.27) → [ISO Sensitivity] → [ISO Auto],
and press the
button is pressed after selecting [ISO Auto], the current setting will
the
be applied).
When the ISO Auto Range is set in the Quick Set menu (P.34), select [ISO
AUTO] and press the
screen. (By pressing the
selecting [ISO AUTO], the current setting will be applied.)
2
Set [Lower limit] and [Upper limit].
Lower limit
ISO 100 (Default)
Upper limit
ISO 800
CAUTION !!
It is not possible to set the same value to the Lower limit and Upper limit

and reversed value.
By default, the ISO sensitivity step setting is 1 EV. However, it is
possible to select 1/3 EV.
It is possible to set the ISO sensitivity from [
→ [ISO Sensitivity Step].
1 EV (Default)
1/3 EV
68
button to move the ISO Auto Range setting screen. (When
button to display the ISO Auto Range setting
ISO 200
ISO 200
ISO 400
(Default)
It is possible to set the ISO sensitivity step 1EV.
It is possible to set the ISO sensitivity step 1/3EV.
button or the shutter botton halfway after
ISO 400
ISO 1600
ISO 3200
ISO 6400
Capture Settings] (P.27)