To Change File Names - Sigma dp3 Quattro User Manual

WARNING !!
When Folder numbering / File numbering is reached to "999-9999",

even if the card has the capacity, the message of [Cannot allocate file
or folder number.] will be displayed and it is not possible to take
pictures any more. Please check the File numbering in reviewing
display. If the file number of "999-9999" exists in the card, please
proceed as follow.
1 . Transfer all files in the card to your PC.
2 . Format the card.
3 . If the [File Numbering] is set to [Continuous], once set to [Auto
Reset].
4 . If you usually set [File numbering] to [Continuous], set to
[Continuous] once again.
If you wish to continue to take pictures with any other card, please

proceed it from step 3.

TO CHANGE FILE NAMES

File name of images can be selected from either "SDIM" or "DP3Q".
Select the setting from [
SDIM (Default)
DP3Q
The number in the file name will be continuous even after changing the

setting from SDIM to DP3Q or vice versa.
When [Adobe RGB] is selected from [

[Color space], the file name will consist of "_SDI" instead of "SDIM", and
become "_P3Q" instead of "DP3Q".
Camera Settings] (P.27) → [File Name].
File name will be "SDIMxxxx.xxx".
File name will be "DP3Qxxxx.xxx".
Capture Settings] (P.27) →
119