S Shutter Speed Priority Ae - Sigma dp3 Quattro User Manual

S SHUTTER SPEED PRIORITY AE

When you set the desired shutter speed, the camera will select the
appropriate aperture value for correct exposure. You can achieve stop
action effects by selecting a fast shutter speed, or give the feeling of motion
to a moving subject by selecting a slow shutter speed.
Depending on the selected shutter speed, the camera automatically sets

the aperture in the following range.
Shutter Speed
30s ~ 1/1250s
1/1600s
1/2000s
WARNING !!
If the appropriate aperture value is beyond the range of the lens in use,

due to the subject being too bright or too dark, the aperture value
indicator will blink. If the subject is too bright, set the shutter speed to a
faster one, or if the subject is too dark, set the shutter speed to a slower
one, until the indicator stops blinking.
46
1
Set the Exposure Mode to the S position.
(The shutter speed value is illuminated in
green.)
2
Set the desired shutter speed by rotating
the Front Dial.
(The shutter speed value can be set in
1/3 stop increments from 30 seconds to
1/2000 seconds.)
3
Press the shutter button "half-way" to
verify the focus and take the picture.
Aperture
F2.8 ~ F16
F4.0 ~ F16
F5.6 ~ F16