Dolby Pro Logic Surround Sound - NAD S 570 Owner's Manual

Dvd / cd / mp3 player
Hide thumbs Also See for S 570:
Table of Contents

Advertisement

DOLBY PRO LOGIC SURROUND SOUND

One can enjoy the high quality sound of Dolby Pro Logic Surround Sound if your A/V receiver is equipped with a Dolby Pro Logic Surround Sound
processor or decoder.
To enjoy Dolby Pro Logic sound
from this DVD player you need the
following:
• DVD recorded in Dolby Pro
Logic format.
• Dolby Pro Logic A/V receiver
equipped with a Dolby Pro
Logic decoder, or Dolby Pro
Logic decoder and power
amplifier
• 5 speakers
Connection example
Front Speaker
(left)
WITH A RECEIVER EQUIPPED WITH A DOLBY DIGITAL DECODER
Connect the equipment the same way as described in Enjoying Dolby Digital Sound. Refer to that A/V receiver's owner's manual and set the receiver
so you can enjoy Dolby Pro Logic Surround sound.
WARNING
Do not set the Digital Audio Output of this DVD player to 'Analogue Off' unless you are connecting the DIGITAL OUT jack of this DVD player to
an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers. (Refer to
Initial Setup Settings, Audio)
NOTE
Refer to the owner's manual of your audio equipment as well. Depending on your Dolby Digital surround sound decoder, the decode rate may
be 96 or 48K. When you connect the S570 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections. The output sound of the S570 has a wide dynamic range. Be sure to adjust the receiver's volume to a
moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or
disconnect the S570's power cord. If you leave the receiver power on, the speakers may be damaged.
CONNECTING TO A SURROUND SOUND SYSTEM
From the
MIXED AUDIO L/R jacks
75-Ohm audio cables
To RCA audio input jacks of
the surround sound receiver
equipped with a Dolby Pro
Logic decoder To audio input
Rear speaker (left)
From S-VIDEO / Component Video /
Composite or SCART
S-VIDEO / Component / Composite
75–Ohm coaxial or SCART cable
To S-VIDEO / Component / Composite or
SCART inputs of the receiver
Centre speaker
TV
Rear speaker (right)
Setup
Front speaker
(right)
19

Advertisement

Table of Contents
loading

Table of Contents