Sound; Speaker Selection - NAD T 513 Owner's Manual

Preparation
BEFORE OPERATION

SOUND

DIGITAL AUDIO OUTPUT
Each DVD disc has a variety of audio output options. Set the player's
Digital Audio Output according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" if you connected
the DVD Player's DIGITAL OUT jack to a Dolby Digital decoder (or an
amplifier or other equipment with a Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected the DVD Player's
DIGITAL OUT jack to an amplifier or other equipment with a DTS
decoder, Dolby Digital decoder or MPEG decoder.
PCM: Select when connected to a 2-channel digital stereo amplifier. The
DVD player outputs sounds in the PCM 2channel format when you play
a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
SAMPLE FREQUENCY
To change the Sample Frequency setting, first select the desired Digital
Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling 96 KHz signals,
select 48 KHz. When this choice is made, this unit will automatically
convert any 96 KHz signals to 48 KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96 KHz signals, select
96 KHz. When this choice is made, this unit will pass each type of signal
through without any further processing.
14
DOLBY
/PCM
DIGITAL
Stream/PCM
PCM
Sample Freq.
48 KHz
96KHz