SoftBank 810T User Manual page 78

Hiragana to Alphanumerics/Katakana Conversion
Enter alphanumerics and katakana in kanji (hiragana) entry mode.
Example: Entering TOM (single-byte) in kanji (hiragana) entry mode
1
In a text entry window, press the key to which the
3
character is assigned
Press 8 (once)
→6
●
is entered.
やふは
2
Press J (Kana)
The conversion candidates of the roman characters and katakana are
displayed.
By pressing J (Kana)/ K (Num.), you can switch between roman
●
character/katakana conversion and number conversion.
3
Press B→ Use E to select TOM (single-byte)
→@
TOM (single-byte) is determined.
Tip
When you want to enter date and time, you can do so in double-byte
7
kana (kanji conversion) input mode. For example, if you enter
1 / 2 / 3 /
by pressing
12:30 are displayed.
3-6
(three times) →C→6
0 and then press / K (Num.), 12/30 or k
Displaying Characters in Opposite Order
In all the input modes except numeric, you can display unconverted characters
on the cursor in the opposite order from the one on the Key assignments
chart (page 3-2) by pressing H .
Example: Entering the character assigned to 2
Press 2
(once)
か き く け こ
Symbols
Double-byte and single-byte symbols can be entered.
1
In a text entry window, press #
The double-byte symbol list is displayed.
2
Select a symbol →@
The selected symbol is entered and the symbol list disappears.
To enter symbols continuously from the symbol window, select
●
symbols and press H .
あかさわ
Tip
7 Symbols that you have selected before are displayed in the log area at
the top of the symbol window. You can enter symbols by selecting from
the log area, too.
Press H after pressing 2 .
⇒ か こ け く き