SoftBank 810T User Manual page 226

Tip
7 You can store tasks from 2000/01/02 to 2015/12/30. The tasks on and
after 2015/12/30 that you saved using another SoftBank handset
cannot be used on this handset.
7 You cannot store your tasks without entering Title or Contents.
Setting the Alarm
Main
14
E
Tools
menu
1
Press K (Menu) → Create New →@→ Alarm →@
2
Select ON →@
■ Setting an Alarm Time
Select Time →@→Enter an alarm time→ @
Enter an alarm time in accordance with the 24-hour system.
●
■ Setting an Alarm Duration
Select Duration →@→Enter a ringing duration→ @
■ Setting a Sound Preinstalled in Your Handset as the Alarm
Tone
Select Tone →@→ Patterns/Melodies →@→Select an alarm
tone→ @
■ Setting a Sound Saved to Data Folder/Memory Card as
the Alarm Tone
Select Tone →@→ Phone Memory/Memory Card →@→Select
a fi le→ @ (twice)
■ Setting the Time Reader as an Alarm
Select Tone →@→ Time Reading →@
14-28
E
Tasks
■ Setting the Alarm Volume
Select Volume →@→Adjust the alarm volume→ @
■ Setting the Alarm Vibration
Select Vibration →@→Select a vibration pattern→ @
■ Displaying the Original Image at the Setting Time
Select Image →@→ Original →@
■ Displaying an Image Saved to Data Folder/Memory Card
at the Setting Time
Select Image →@→ Phone Memory/Memory Card →@→
Select an image→ @→ Use E to adjust the position of the image
to clip→ K (Cut)→ @
3
Press J (OK) →J (OK) → OK →@
If you select Notify Only Once when a confi rmation window
●
telling that the alarm will not start if the power is off appears, this
window will not be displayed from the next time.
Tip
For details about how the handset operates during the alarm, see page
7
14-23.
7 When the manner mode (page 12-1) or alarm volume of the Calendar
in Original Mode (page 12-2) is set to Silent, the alarm does not play.
The handset does not vibrate when the vibration settings for the
7
calendar (page 12-2) are OFF for Original Mode of manner mode.
7 When you change the Main City (page 14-35) for the World Clock, the
alarms are updated to match the time of the newly set city. And if DST
(Daylight Saving Time) is turned ON or Date&Time setting (page
1-15) is changed, then the alarms are also updated.