Table of Contents
Advertisement
Setting the Video Compression Method
Set the compression method for videos recorded in Video Mail.
1
On the finder window, press K (Menu) → Movie →
@→ Encode →@
2
Select MPEG4/H. 263 →@
Tip
The encoding setting is set to MPEG4 when playback is ended or the
7
mode is changed.
QR Code
The Main Camera allows you to scan QR codes and save
up to ten scanned data items. However, this number
depends on the amount of available memory space.
Connect to a URL included in the scanned information,
create a message to send to an address included in the
scanned information or save it to Phone Book.
Note
The camera may not be able to scan a QR code that is dirty or in the
7
dark.
7
Some QR codes cannot be scanned depending on the size or version.
Tip
7
When a QR code has been divided into data areas, you can scan up to
16 data areas consecutively, and they will be saved as a single QR code
data.
Scanning a QR Code
Set the Close-up Switch to macro mode before scanning a QR code (page
7-4).
Main
E
E
Camera
menu
1
Select Scan →@
2
Frame a QR code in the Main Display →@
Use F to adjust the exposure.
●
When the QR code has been divided into data areas, select YES to
●
scan the other data areas. When all the areas are scanned, the QR
code data is displayed.
3
Press K (Menu) → Save →@
Tip
The following step can also activate the barcode reader:
7
Main menu→Tools→Useful Tools → Scan Data
J (Mode) is pressed on the scan QR code window, the camera mode
j
If
7
can be changed.
K (Menu) to perform the following:
k
7
After scanning a code, press
Save/Copy/To Message
Scan Data
7
7-11
Advertisement
Table of Contents
