SoftBank 810T User Manual page 174

11
Switching to Data Transfer Mode from the Main Menu
Switch to data transfer mode manually from the Main menu if the handset
does not automatically switch to data transfer mode when connected by USB,
or when you want to establish a connection again after canceling the data
transfer mode.
1
Use the USB cable to connect your handset to a PC
2
In Standby, press @→ Settings →@→ Connectivity
→@→ USB →@→ Data Transfer →@
Tip
7 Offline mode is set while your handset is in data transfer mode. If the
handset cannot switch to offline mode because it is communicating
with another device, a confirmation window appears.
7 A warning window appears if the memory card is not properly
formatted. Format the memory card and perform the operation again.
If the USB cable is unplugged while the transferring data window is
7
shown, a confirmation window appears and the handset is disconnected
from the device.
Sending Data
1
Switch your handset to data transfer mode
2
Follow the instructions on the PC
11-6
Note
Do not remove the memory card while the transferring data window is
7
displayed.
Canceling the Data Transfer Mode
1
Use the connected PC's function to remove an
external device
Setting Display of the Data Transfer Mode Confirmation Window
Set whether to display the confirmation window for switching to data transfer
mode.
Main
E E
Settings
menu
Confirmation
1
Select Display/Do not Display →@
Tip
If Do not Display is set for the display setting of the confirmation
7
window for switching to data transfer mode, the window does not
appear even if a USB cable is connected to your handset in Standby. You
can also switch to data transfer mode from the Main menu (page 11-5).
E
Connectivity USB
E