SoftBank 810T User Manual page 344

Table of Contents

Advertisement

The continuous standby time refers to the average length of time a signal
can be received normally when the handset is closed, the handset is in a
stationary state, a new fully charged battery pack is attached and there are
no calls made/received or operations performed. If the handset is in a
location outside the service area or where it is difficult to receive a signal (in
a building, vehicle, bag, etc.), this time may be reduced to half or less. This
23
time may also be affected by other factors such as the operating
environment (battery state, temperature, etc.). The value for continuous
standby time is when the international calls setting was set to 3G.
The operating time of the battery was calculated when a stable signal was
received constantly. However, this time may be reduced to half or less if
the handset is used in a location where the signal is weak or the handset
is left in Standby when it is outside the service area. Repeated charging
and discharging a battery shortens the operating time. If the operating
time becomes too short, purchase a new battery pack.
If the mobile light is used frequently for taking pictures and recording
videos or as a flashlight, the continuous talk time and continuous standby
time become shorter.
When an S! Appli is activated, the continuous talk time and continuous
standby time become significantly shorter.
If the handset is used with the main display illuminated frequently (for
Yahoo! Keitai use, etc.), the continuous talk time and continuous standby
time become shorter.
Note that the LCD display may have defective pixels (dead or stuck pixels).
23-18
AC Charger
Input Voltage : 100 to 240 V AC
: 50/60 Hz
Charging Temperature Range : 5 to 35°C

Advertisement

Table of Contents
loading

This manual is also suitable for:

813t811t

Table of Contents