Setting The Security - Security Menu; Setting Tab; Referer Check Tab - Sony SNC-EP520 User Manual

Hide thumbs Also See for SNC-EP520:
Table of Contents

Advertisement

Setting the Security
— Security Menu
When you click
Security
Security menu appears.
This allows you to control which computers can have
access to the camera.
Likewise, when using IPv6, security settings can be
configured for each network.
The Security menu consists of the Setting and Referer
check tabs.

Setting Tab

Security function
To activate the security function, select On.
Default policy
Choose either Allow or Deny regarding the basic limit
policy imposed on computers whose network addresses
are not specified in the Network address/Subnet 1 to
Network address/Subnet 10 menus below.
Network address/Subnet 1 to Network
address/Subnet 10
Type the network addresses and subnet mask values that
you want to allow or deny access to the camera.
You can specify up to 10 network addresses and subnet
mask values. For a subnet mask, type 8 to 32.
(In the case of IPv6, enter a value between 8 and 128.)
Select Allow or Deny from the drop-down list on the
right for each network address/subnet mask.
Tip
The subnet mask value represents the bit number from
the left of the network address.
For example, the subnet mask value for "255.255.255.0"
is 25.
If you set 192.168.0.0/24 and Allow, you can allow
access from computers having an IP address between
"192.168.0.0" and "192.168.0.255."
60
Setting the Security — Security Menu
in the Administrator menu, the
Note
You can access the camera even from a computer having
an IP address whose access right is set to Deny, if you
enter the user name and password set for the
Administrator boxes in the User menu.
OK/Cancel
See "Buttons common to every menu" on page 26.

Referer check tab

Referer check checks if the web page which requires
access is authorized when the camera is accessed. If the
web page is not authorized, the camera denies access of
the web page to the camera.
If you want to access from web pages other than the one
that the camera provides, register their host names and
port numbers in the Exception list.
Referer check
Select the checkbox for the Referer check.
Exception list
Register the hosts that are not targeted for the Referer
check.
No.
Select the registered numbers of the Exception list.
Host name
Type the host name or IP address of the PC that supplies
the web page you want to register on the Exception list.
Port No.
Type the host name or the port number of the PC that
supplies the web page you want to register on the
Exception list.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents