Introduction; Features; Conventions Used In This Manual; Using The Teac Global Site - Tascam US-2x2 Reference Manual

Features

• 24-bit/96kHz audio interface
• Multiple
analog signals (L/R) can be input simultaneously
1
and output to a computer by USB at the same time
• Multiple XLR mic inputs (balanced
inputs (balanced /unbalanced
3
• Electric guitars and basses, for example, can be connected
to the standard TS jack inputs when the MIC/LINE INST
switch is set to INST (instrument input)
• Balanced stereo line
and headphone
6
• MIDI IN and OUT connectors
• Direct monitoring function allows input monitoring with
low latency
• USB port (USB-B type, USB 2.0 standard)
Use the included USB cable to connect the unit to a
computer. To connect to an iOS device, use a Lightning to
USB Camera Adapter made by Apple Inc.
CAUTION
When using a US-2x2 that is connected to a computer, it will
operate using USB bus power.
However, the power supply will be insufficient when using
the unit connected to an iOS device by USB, so you will need
to purchase a separate AC adapter designed for use with
this unit (TASCAM PS-P520, DC5V). (When using a US-4x4,
always connect the included AC adapter.)
• Software mixer function convenient for live broadcasting
and karaoke (application must be installed in addition to a
driver)
• DAW software included
US-2x2: 2 inputs, US-4x4: 4 inputs
1
XLR-3-31 equivalent
2
US-2x2: 2 inputs, US-4x4: 4 inputs
The US-2x2 has XLR/TRS combo jacks
Standard 6.3mm (1/4") TRS stereo jack
3
(MIC/LINE INST switch set to MIC/LINE)
US-2x2: 2 inputs, US-4x4: 4 inputs
4 Standard 6.3mm (1/4") TRS stereo jack
(MIC/LINE INST switch set to INST)
US-2x2/US-4x4: both 2 inputs
Only IN1-IN2 on the US-4x4
5
Standard 6.3mm (1/4") TRS stereo jack
6
US-2x2: 2 outputs, US-4x4: 4 outputs
Standard 6.3mm (1/4") stereo jack
7
US-2x2: 1 output, US-4x4: 2 outputs
Note about computer operation
8
If you are unsure about anything related to the basic operation
of a computer when it is mentioned in an explanation in this
manual, please refer to the computer operation manual.
To use this unit with a computer, dedicated software must be
installed on the computer.
For details about software installation, see "Installing the
dedicated software" on page 6.
) and standard TRS jack
2
)
4
5
outputs
7
1 – Introduction

Conventions used in this manual

The following conventions are used in this manual.
• Buttons, connectors and other physical parts of this unit are
written using a bold font like this: PHONES knob.
• Information shown on the computer display is written like
this "OK".
• Additional information is provided as necessary as tips,
notes and cautions.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
CAUTION
Failure to follow these instructions could result in injury,
damage to equipment or lost recording data, for example.

Using the TEAC Global Site

You can download this Reference Manual and the Owner's
Manual necessary for this unit from the TEAC Global Site (http://
teac-global.com/).
1. Open the TEAC Global Site (http://teac-global.com/).
2. In the TASCAM Downloads section, click the desired
language to open the Downloads website page for that
language.
NOTE
If the desired language does not appear, click Other
Languages.
3. Click the product name in the "Search by Model Name"
section to open the Downloads page for that product.
4. Select and download the Owner's Manual that are needed.
3
TASCAM US-2x2/US-4x4